DocSupra › Integrity Scanner › Check if a photo was edited · Español
How to check whether a photo of a document was edited.
The short answer. Drop the JPEG or PNG into the Integrity Scanner. It reads what the file carries (the camera or phone, any editing software, the created and modified dates) and runs up to three pixel analyses on your device: error level (for JPEG files), sensor grain and copy-move. Areas that were pasted, smoothed over or cloned are outlined on the image.
A photo of an ID, a pay stub or a statement can be changed without leaving anything you would notice by eye. What it leaves is in the pixels and in the file: a patch saved at a different compression level, grain that stops matching the rest of the picture, a region copied over another, the name of an editor in the metadata. The scanner shows those facts and leaves the judgement to you.
What it analyses
Areas saved at a different compression level than the rest of the image stand out. A pasted number or a retouched field usually does.
A camera leaves its own fine noise over the whole frame. A pasted patch or a smoothed-over area breaks it. The grain is compared between areas of similar brightness, so a dark desk beside white paper is not mistaken for an edit; when a photo has too little grain to judge, the scanner gives no verdict on grain instead of a guess.
A region copied over another part of the same photo, with the source and the copy outlined. Repeated textures, letters and digits are ignored on purpose, so a form full of identical digits does not raise a false alarm.
Camera and phone firmware, photo editors and office suites each leave their name. Created and modified dates are compared, with time zones respected when the file carries them.
GPS location, camera serial number, owner and author names. You can download a copy of the photo without the location, device and author data.
Low: nothing recorded after the photo was taken. Medium: one thing worth a look, such as a crop, a re-save by an editor or a single pixel signal. High: the file was edited with design software, a region was cloned, or an area differs from the rest in both compression and grain.
How to check a photo
Open the Integrity Scanner
Go to docsupra.com/?abre=scanner.
Drop the photo
JPEG or PNG, up to 40 MB, or a folder or ZIP with hundreds. The file is read on your device.
Read the answers
Edited?, Source and time, and Safe to open? on the card; then open the evidence view to see the three layers over the image.
Keep the report
Export the PDF report with the SHA-256 of the file, the level and the facts behind it.
What it cannot tell you
A signal is a technical fact about the pixels, not an accusation. A screenshot, or a photo re-saved by a messaging app, loses most of its history: the scanner reports that the file was re-encoded and what remains. A careful edit re-saved at uniform quality can leave no signal at all, so “no sign” means that nothing was found, not that the photo is genuine. The scanner does not verify authenticity and it is not expert testimony.
Is this image AI-generated?
Is this image AI-generated? What a file can prove, and what it cannot.
The short answer. Drop the JPEG or PNG into the Integrity Scanner. It reads what the file itself records: the software that made or last saved it (image generators and design programs leave their name when the file was not stripped), the created and modified dates, and the pixel evidence of editing: error level, sensor grain and cloned areas, outlined on the image. When design or image-generation software is recorded, the file is rated High. When nothing is recorded, the scanner says so, because an empty file is not evidence of a real photograph.
There is no detector that proves a photo is real, and anyone who sells you one is selling confidence. What a file can give you is its own record: who made it, when, and whether its pixels show the marks of editing. The scanner reads that record on your device and tells you where the evidence ends.
What it reads in the image
Camera and phone firmware, photo editors, design programs and image generators each leave their name when the file was saved with its metadata. The scanner reports the name it finds, and rates design or generation software High.
Created and modified, compared with the camera time when there is one. A photo that was never taken by a camera has no capture time to show.
Areas saved at a different compression level than the rest stand out: a pasted face, a retouched number, a replaced background.
A real camera leaves fine noise over the whole frame. Smoothed-over areas and pasted patches break it, and the scanner outlines them.
A region copied over another part of the same image, with the source and the copy outlined. Repeated letters and textures are ignored on purpose.
GPS location, device serial number and author names, when they are there; a copy without them can be downloaded.
How to check an image
Open the Integrity Scanner
Go to docsupra.com/?abre=scanner.
Drop the image
JPEG or PNG, up to 40 MB, or a folder or ZIP. The file is read on your device.
Read the three answers
Edited? (with the software or the pixel evidence behind it), Source and time, and Safe to open?.
Open the evidence view
The three pixel layers over the image, the recorded software and dates, and the level with its technical reasons.
What it cannot tell you
Whether an image is real. A stripped file carries no software name and no camera data, and an image that was screenshotted, re-saved by a messaging app or printed and scanned loses its record the same way; the scanner then reports that nothing is recorded, which is not proof either way. Pixel evidence shows editing, not generation: a generated image that was never edited can look clean to it. Generators change every month and leave different marks. The scanner states the facts the file holds, with their limits, and never a verdict on the person who sent it.
Questions
Can any software prove that a photo is real?
No. A file can carry evidence of editing or of the program that made it; it cannot prove the absence of generation. Be careful with anyone who promises a percentage of “AI probability” from the pixels alone.
The image has no metadata at all. Does that mean it was generated?
No. Messaging apps, social networks and screenshots strip metadata from real photos every day. The scanner reports that nothing is recorded and keeps the pixel evidence separate.
What does the scanner do when it finds an image generator’s name?
It reports the name as recorded and rates the file High, the same as design software. It is a fact about the file, not an accusation.
Is my image uploaded to a server?
No. The file is read on your own device, inside the browser. There is no upload endpoint, no server copy and no retention period. Once the page and its engine have loaded you can disconnect from the internet and it still reads the file and shows the result; downloading a paid result needs a connection for the licence check, which sends a count and never the file.
What does it cost?
Where the file came from and whether it is safe to open are shown to everyone. Whether it was edited, how, and what it exposes comes with a check: 3 checks with the $9.99 pack, 50 with the $19.99 pass, or up to 1,000 files a month with the $14.99 subscription. It is included with Professional Team and Corporate Studio.
What the Integrity Scanner costs
From one lease to a whole department: pay once for a few checks, or subscribe.
Document downloads are not part of this subscription: repairing and exporting documents is the Compliance Studio. Prices are in USD and exclude any tax that applies in your country; Stripe calculates it and shows it before you pay.
Check a photo now →Questions
Can it tell if a photo was retouched?
Often. The evidence view runs up to three pixel analyses on the device: error level, for JPEG files (a region saved at a different compression level than the rest), sensor grain (a pasted patch or a smoothed-over area breaks the camera’s own noise pattern) and copy-move (a region duplicated inside the same photo, with the source and the copy outlined). They are deliberately conservative: repeated textures and repeated letters or digits are ignored, and a clean photo shows no signal.
Does a photo sent by a messaging app still show the evidence?
Messaging apps usually re-compress photos and remove their metadata. The pixel analyses still run on what arrives, but the camera data and the original compression are gone; the scanner reports that the file was re-encoded.
Which files can it read?
JPEG and PNG photos and PDF documents, up to 40 MB each, one at a time or as a folder or ZIP.
Is the photo uploaded?
No. The file is read on your own device, inside the browser. There is no upload endpoint, no server copy and no retention period. Once the page and its engine have loaded you can disconnect from the internet and it still reads the file and shows the result; downloading a paid result needs a connection for the licence check, which sends a count and never the file.
What does it cost?
Where the file came from and whether it is safe to open are shown to everyone. Whether it was edited, how, and what it exposes comes with a check: 3 checks with the $9.99 pack, 50 with the $19.99 pass, or up to 1,000 files a month with the $14.99 subscription. It is included with Professional Team and Corporate Studio.
More on DocSupra
Made and copyrighted © 2026 by Soelys Muñoz. DocSupra™ is her trademark. All rights reserved. How to recognise the real site.